Data Center Cooling | Data Center Misting System

Although primarily mistcooling systems were built for outdoor cooling, the misting systems applications have evolved tremendously over the few years for specialized applications, some of which are listed below:

APPLICATION: DATA CENTER COOLING

Data Center Cooling: Data centers use a lot of energy to keep the servers working. This generates a lot of heat, and just like your body, it requires cooling to keep the data center efficient and keep the energy costs low.

Solution:

Our commercial misting system with 3/8 inch stainless steel tubing and 1500 PSI Misting Pump help create the required cooling. The features of the commercial misting system are:

  • 1500 PSI MIsting Pump
  • 3/8 Inch OD Flexible Nylon Tubing
  • 3/8 Compression Misting Parts and Accessories
  • Stainless Steel Misting Nozzles
  • For large scale Commercial Misting Applications including data centers, AC Pre-cooling, Dust Suppression Misting

    3 GPM PUMP SPECIFICATIONS

    ● Maximum Outlet Pressure: 1500PSI
    ● Maximum Pump Speed (3 GPM.): 1750RPM
    ● Maximum Inlet Pressure: 125PSI
    ● Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if the Pressure switch is
    bypassed
    ● Maximum Flow: 3 GPM (Refer to manufacturing label on pump)
    ● Voltage: 110V/ 220V AC (Refer manufacturing label on the pump)
    ● Oil Type: 10W40 Synthetic Motor Oil
    ● Oil Capacity: 11.8oz
    ● Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
     
     
     
     
    12/19/2021
    By Mistcooling.com